John Deere 3038E Pto problems

John Deere 3038E Pto problems Problems

John Deere 3038E Pto problems

Hello everyone I am new to this. I have a John Deere 3038E with a front in the charger. I have a small problem. My strength only Stopped work. It only has 138 hours on it from again. I have replaced the power outlet switch and the solenoid. Any help would be appreciated. Is there a relay of the power takeover that is overlooking?

I have a 2025R John Deere. I was only 25 hours. In it and the outburst stopped working. Pull the switch and nothing turn off the tractor Restart the switch and work. Sometimes for 5 minutes sometimes 5 seconds. It was not the switch of the force, but the reversing switch under the tractor. It is easy to fix, but as I was in guarantee, I did that JD did it. Apparently there was a group of bad reverse switches in several JD tractors. My dealer told me that they changed about 10-20 of these switches per month. It is an easy but very frustrating arrangement on a machine of 30 thousand dollars. The reversal switch is on the right side next to the advance and reverse pedals. If you want to see if that is the problem, make a cable and connect the red cable and white wire with blue stripe. And look if the force takes it works if it does then that is the problem. If you do not want to risk jumping the cables then I would only get a switch there around $ 25 on eBay.

Rate article
( 4 assessment, average 5 from 5 )
DIKMA EQUIPMENT
Add a comment